Direct buyer · CA
Industrial Electrical Equipment Buyer for Cambria, CA Facilities
When a line-up in Cambria comes out, the equipment stops being an asset on a depreciation schedule and becomes a rigging problem with a disposal cost attached. We buy that problem outright. Switchgear, transformers, generators, bus duct and plugs, panelboards, breakers, motor control centers and copper cable — and the teardown, rigging and freight are ours, not a subcontractor you have never met.
California · statewide- Location
- Cambria, CA
- State
- California
- Utilities
- PG&E, Southern California Edison
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Cambria
Title 24 upgrades, refinery turnarounds in the Bay Area and Los Angeles basin, and aggressive PCB and oil handling rules under DTSC make California removals documentation-heavy; we quote the compliance work inside the offer rather than as an extra. For Cambria specifically, that density helps: crews already move through Santa Clara, San Jose, Los Angeles, Sacramento and San Diego, so mobilization is a scheduling question rather than a cost problem.
Paperwork travels with the job: a certificate of insurance naming your entity, a W-9, a signed purchase agreement listing every asset and its price, oil test and disposal manifests where transformers are in scope, and weight tickets or a bill of lading for what leaves the Cambria site. Maintenance, EHS and accounting each get the document they need.
Plate 02
What we buy in Cambria
Fourteen categories. We buy every one of them at Cambria sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Copper is the floor under most of this equipment, and it is a floor that moves. Bus bar, windings and feeder cable set a minimum value we can always pay on a Cambria lot; resale demand for the specific make and model is what lifts the offer above it. Obsolete bus plugs and discontinued panelboard interiors are the clearest example — unglamorous parts that plants cannot buy new anywhere.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Cambria site |
| Freight | I-5, I-80, I-10, US-101 and the 405 |
Plate 04
Safety and documentation
Safety is scope, not a brochure page. Crews working in Cambria operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
Other California locations we buy electrical equipment in:
- Cameron Park
- Camino Tassajara
- Camp Pendleton South
- Campbell
- Canyon Lake
- Capitola
- Carlsbad
- Carmel Valley Village
Plate 06
Cambria questions
What happens to the equipment after you buy it?
Serviceable gear is tested, reconditioned where needed and resold as replacement equipment — that resale is what funds your offer. What cannot go back into service is dismantled for copper, aluminum and steel recovery through permitted processors, with regulated fractions documented.
Do you buy equipment that is still energized and in service?
Yes, and most of what we buy is. We quote it now and remove it on your cutover date. Telling us at the quote stage which Cambria assets are still live lets us build the phasing and the clearance coordination into the schedule from the beginning.
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your Cambria site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Cambria lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Cambria purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in Cambria, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Cambria to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Cambria?
Photos of the nameplates are enough to start. Written offer the same business day.