Direct buyer · CA
Campbell, CA: Industrial Electrical Equipment Bought and Removed
Pulling electrical gear out of a Campbell facility normally takes three vendors: an electrician to de-energize, a rigger to move the heavy sections, and a hauler to get it off site. Coordinating three trades around one outage window is where these projects go sideways. We collapse all three into one contract and pay you for the equipment on top of it.
California · statewide- Location
- Campbell, CA
- State
- California
- Utilities
- PG&E, Southern California Edison
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Campbell
Our California routing runs along I-5, I-80, I-10, US-101 and the 405, which keeps trailer and crew cost predictable on Campbell projects. Utility territory matters too — PG&E, Southern California Edison, SMUD, LADWP each have their own clearance, metering and disconnect expectations, and we have worked inside them. Title 24 upgrades, refinery turnarounds in the Bay Area and Los Angeles basin, and aggressive PCB and oil handling rules under DTSC make California removals documentation-heavy; we quote the compliance work inside the offer rather than as an extra.
If the Campbell equipment is still carrying load, we phase it. Usually that means dead sections and spares first, then distribution as circuits are released, then the main line-up once the last feeder is isolated. The phasing goes into the offer so nobody is improvising in an energized room at two in the morning.
Plate 02
What we buy in Campbell
Fourteen categories. We buy every one of them at Campbell sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Sometimes the equipment value exceeds our removal cost and you receive a check. On older, stripped or badly access-restricted Campbell scopes, the removal cost exceeds the value and the project nets near zero or a modest fee. You hear which one you are looking at up front rather than halfway through the teardown.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Campbell site |
| Freight | I-5, I-80, I-10, US-101 and the 405 |
Plate 04
Safety and documentation
If your Campbell facility runs permits — hot work, confined space, elevated work, site orientation, background checks — tell us at the quote stage and we build the time into the schedule rather than asking for an extension later. Our people are used to refinery, hospital and utility permitting cultures.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
We cover the whole California market, so if your equipment is not in Campbell itself, one of these is probably closer:
Plate 06
Campbell questions
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Campbell lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Campbell purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in Campbell, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Campbell to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Campbell?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across California continuously, small Campbell pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Campbell site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Campbell is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Campbell room is still partly live we phase the work.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Campbell?
Photos of the nameplates are enough to start. Written offer the same business day.