Quote · Disconnect · Rig · Pay
Cameron Park, CA Industrial Electrical Equipment Purchase and Removal
We work with Cameron Park plant managers, facility directors, electrical contractors, demolition contractors and utility engineers on the same footing: tell us what is there, we send back a number and a removal plan. Sites with escort requirements, hot work permitting or classified areas are routine rather than exceptional.
California · statewide- Location
- Cameron Park, CA
- State
- California
- Utilities
- PG&E, Southern California Edison
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Cameron Park
Our California routing runs along I-5, I-80, I-10, US-101 and the 405, which keeps trailer and crew cost predictable on Cameron Park projects. Utility territory matters too — PG&E, Southern California Edison, SMUD, LADWP each have their own clearance, metering and disconnect expectations, and we have worked inside them. Title 24 upgrades, refinery turnarounds in the Bay Area and Los Angeles basin, and aggressive PCB and oil handling rules under DTSC make California removals documentation-heavy; we quote the compliance work inside the offer rather than as an extra.
If the Cameron Park equipment is still carrying load, we phase it. Usually that means dead sections and spares first, then distribution as circuits are released, then the main line-up once the last feeder is isolated. The phasing goes into the offer so nobody is improvising in an energized room at two in the morning.
Plate 02
What we buy in Cameron Park
Fourteen categories. We buy every one of them at Cameron Park sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Copper is the floor under most of this equipment, and it is a floor that moves. Bus bar, windings and feeder cable set a minimum value we can always pay on a Cameron Park lot; resale demand for the specific make and model is what lifts the offer above it. Obsolete bus plugs and discontinued panelboard interiors are the clearest example — unglamorous parts that plants cannot buy new anywhere.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Cameron Park site |
| Freight | I-5, I-80, I-10, US-101 and the 405 |
Plate 04
Safety and documentation
If your Cameron Park facility runs permits — hot work, confined space, elevated work, site orientation, background checks — tell us at the quote stage and we build the time into the schedule rather than asking for an extension later. Our people are used to refinery, hospital and utility permitting cultures.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
Other California locations we buy electrical equipment in:
- Camino Tassajara
- Camp Pendleton South
- Campbell
- Canyon Lake
- Capitola
- Carlsbad
- Carmel Valley Village
- Carmichael
Plate 06
Cameron Park questions
What happens to the equipment after you buy it?
Serviceable gear is tested, reconditioned where needed and resold as replacement equipment — that resale is what funds your offer. What cannot go back into service is dismantled for copper, aluminum and steel recovery through permitted processors, with regulated fractions documented.
Do you buy equipment that is still energized and in service?
Yes, and most of what we buy is. We quote it now and remove it on your cutover date. Telling us at the quote stage which Cameron Park assets are still live lets us build the phasing and the clearance coordination into the schedule from the beginning.
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your Cameron Park site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Cameron Park lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Cameron Park purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in Cameron Park, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Cameron Park to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Cameron Park?
Photos of the nameplates are enough to start. Written offer the same business day.