Quote · Disconnect · Rig · Pay
Industrial Electrical Equipment Buyers Serving North Madison, OH
Pulling electrical gear out of a North Madison facility normally takes three vendors: an electrician to de-energize, a rigger to move the heavy sections, and a hauler to get it off site. Coordinating three trades around one outage window is where these projects go sideways. We collapse all three into one contract and pay you for the equipment on top of it.
Ohio · statewide- Location
- North Madison, OH
- State
- Ohio
- Utilities
- AEP Ohio, FirstEnergy, Duke Ener
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in North Madison
Our Ohio routing runs along I-71, I-75, I-70, I-80 and I-270, which keeps trailer and crew cost predictable on North Madison projects. Utility territory matters too — AEP Ohio, FirstEnergy, Duke Energy Ohio, Dayton Power & Light each have their own clearance, metering and disconnect expectations, and we have worked inside them. Ohio's steel, glass, rubber and automotive base created a deep installed inventory of General Electric and Westinghouse switchgear and busway, and the state's freight position makes consolidation efficient.
For North Madison sites we quote two ways when it helps: a single number for the scope as it stands, and a line-by-line itemization showing what the switchgear, the transformers, the busway and the cable each contribute. Some teams need the lump sum to move an approval; others need the detail for their asset records. You can have both.
Plate 02
What we buy in North Madison
Fourteen categories. We buy every one of them at North Madison sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Copper is the floor under most of this equipment, and it is a floor that moves. Bus bar, windings and feeder cable set a minimum value we can always pay on a North Madison lot; resale demand for the specific make and model is what lifts the offer above it. Obsolete bus plugs and discontinued panelboard interiors are the clearest example — unglamorous parts that plants cannot buy new anywhere.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the North Madison site |
| Freight | I-71, I-75, I-70, I-80 and I-270 |
Plate 04
Safety and documentation
Safety is scope, not a brochure page. Crews working in North Madison operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
Other Ohio locations we buy electrical equipment in:
Plate 06
North Madison questions
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your North Madison site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the North Madison lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on North Madison purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in North Madison, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to North Madison to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in North Madison?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across Ohio continuously, small North Madison pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a North Madison site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to North Madison is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in North Madison?
Photos of the nameplates are enough to start. Written offer the same business day.