Delaware · Statewide
Delaware Electrical Equipment Buyers
We purchase switchgear, generators, transformers, bus duct, panelboards, breakers, MCCs and copper cable across Delaware, and we perform the de-energized removal ourselves.
25 cities- State
- Delaware
- Cities
- 25
- Utilities
- Delmarva Power, Delaware Electric
- Corridors
- I-95, US-13 and the Delaware Memor
- Offer
- Same business day
- Phone
- 954-740-1983
Plate 01
How Delaware jobs actually run
Utility territory matters here more than most owners expect: Delmarva Power, Delaware Electric Cooperative each have their own disconnect and metering process, and the sequence of who de-energizes what is usually the longest lead item on the schedule.
Freight is the other half. We route Delaware work along I-95, US-13 and the Delaware Memorial Bridge, which is what keeps trailer and crew cost predictable on a quote instead of padded.
Chemical and pharmaceutical plants along the Delaware River carry classified-area panels, MV switchgear and large drives, and port access at Wilmington helps on heavy loads.
Primary hubs
Wilmington, Dover and Newark — but coverage is statewide, including rural substation and mine sites.
Plate 02
What we buy in Delaware
Electrical Switchgear
We buy low- and medium-voltage switchgear line-ups out of live plants, substations and buildings scheduled for demolition — metal-clad, metal-enclosed, drawout and fixed-mount.
480 V – 38 kV, up to 5,000 AGenerators
Diesel and natural-gas gensets from 100 kW through 3 MW — enclosed, open-skid, trailer-mounted and sub-base tank units, with or without their transfer switches.
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, cast-coil, unit substation and liquid-filled power transformers from 75 kVA through 50 MVA, including units still energized on the pad.
75 kVA – 50 MVABus Plugs
Fusible and circuit-breaker bus plugs by the unit or by the pallet — 30 A through 1,200 A, all major busway systems, any vintage.
30 A – 1,200 A fusible and breakerBus Duct & Busway
Plug-in and feeder busway runs, elbows, tees, end boxes and cable-tap sections — copper or aluminum, 225 A through 5,000 A, removed by our own crews.
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution panels, safety switches and disconnects — loaded with breakers or empty, one panel or a whole building's worth.
100 A – 4,000 AWire & Cable
Surplus and reclaimed copper and aluminum wire and cable — full spools, partial spools, off-spool coils and cable pulled out of cancelled jobs.
#12 AWG – 1,000 MCMLoad Banks
Resistive and resistive/reactive load banks — portable, trailer-mounted, roof-top and permanently installed, 100 kW through 3 MW.
100 kW – 3 MW resistiveCircuit Breakers
Molded-case, insulated-case, low-voltage power and medium-voltage vacuum and air-magnetic breakers — single units, pallets and full sets pulled from a line-up.
15 A – 6,000 A framesMotor Control Centers
Complete MCC line-ups, individual vertical sections, starter buckets and VFD sections — low voltage and medium voltage, any generation.
MCC line-ups, buckets, VFD sectionsSubstations
Complete unit substations and outdoor station equipment — primary switch, transformer, secondary switchgear, structures, bus and relaying, bought as one lot.
Complete unit and station substationsTransfer Switches
Automatic and manual transfer switches, bypass-isolation switches and paralleling gear, 100 A through 4,000 A, pulled with or without their generators.
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatically switched capacitor banks, harmonic filters, reactors and power-factor correction equipment, indoor and outdoor.
50 kVAR – 10 MVARComplete Plant Lots
When a plant closes, we buy the entire electrical scope as one lot — substation to receptacle — and we do the teardown and loading at our cost.
Whole-facility electrical scopePlate 04
Buyer desks
Plate 05
Delaware questions
How fast can you get to a Delaware site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Delaware is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Delaware room is still partly live we phase the work.
How do you handle transformer oil in Delaware?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Delaware and nothing gets dumped — the handling cost is already in the offer.
When do we get paid?
Before the equipment leaves your Delaware dock. Wire, company check or cashier's check, whichever your accounting group prefers. On large phased projects we pay per load as it ships rather than holding everything until the end.
What if the equipment is old or has no test records?
We still quote it. Records raise the number — a NETA test report on a breaker or a transformer is the single document that most improves what we can pay — but their absence disqualifies nothing. We price Delaware equipment on what our technicians and the replacement market say it is worth.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Equipment sitting in Delaware?
Send photos or a list. We reply the same business day.