Own crews · Own trailers · CA
Exeter, CA Industrial Electrical Equipment Purchase and Removal
Whether it is one pad-mount transformer behind a Exeter building or a full plant scope from the incoming substation down to the receptacles, we will buy it as it sits. Send a nameplate photo, a rough count or a walk-through and the written offer comes back the same business day, in a form you can hand straight to purchasing.
California · statewide- Location
- Exeter, CA
- State
- California
- Utilities
- PG&E, Southern California Edison
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Exeter
Coverage in Exeter is run off our California routing along I-5, I-80, I-10, US-101 and the 405. Coordination with PG&E, Southern California Edison, SMUD, LADWP on clearances, metering removal and final disconnect is part of the scope, not a change order. Title 24 upgrades, refinery turnarounds in the Bay Area and Los Angeles basin, and aggressive PCB and oil handling rules under DTSC make California removals documentation-heavy; we quote the compliance work inside the offer rather than as an extra.
Paperwork travels with the job: a certificate of insurance naming your entity, a W-9, a signed purchase agreement listing every asset and its price, oil test and disposal manifests where transformers are in scope, and weight tickets or a bill of lading for what leaves the Exeter site. Maintenance, EHS and accounting each get the document they need.
Plate 02
What we buy in Exeter
Fourteen categories. We buy every one of them at Exeter sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Copper is the floor under most of this equipment, and it is a floor that moves. Bus bar, windings and feeder cable set a minimum value we can always pay on a Exeter lot; resale demand for the specific make and model is what lifts the offer above it. Obsolete bus plugs and discontinued panelboard interiors are the clearest example — unglamorous parts that plants cannot buy new anywhere.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Exeter site |
| Freight | I-5, I-80, I-10, US-101 and the 405 |
Plate 04
Safety and documentation
Nothing leaves a Exeter site undocumented. Nameplate data is recorded as equipment comes out, regulated items like transformer oil and older capacitors are separated under their own profile, and you receive a reconciled report your EHS group can file against the original purchase agreement.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
Other California locations we buy electrical equipment in:
Plate 06
Exeter questions
Can you work nights, weekends or during a shutdown in Exeter?
Regularly. Most electrical removals happen outside production hours because that is when circuits can be released. Night, weekend, holiday and turnaround windows in Exeter are normal scheduling for us, not a premium service.
What happens to the equipment after you buy it?
Serviceable gear is tested, reconditioned where needed and resold as replacement equipment — that resale is what funds your offer. What cannot go back into service is dismantled for copper, aluminum and steel recovery through permitted processors, with regulated fractions documented.
Do you buy equipment that is still energized and in service?
Yes, and most of what we buy is. We quote it now and remove it on your cutover date. Telling us at the quote stage which Exeter assets are still live lets us build the phasing and the clearance coordination into the schedule from the beginning.
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your Exeter site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Exeter lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Exeter purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Exeter?
Photos of the nameplates are enough to start. Written offer the same business day.