Quote · Disconnect · Rig · Pay
Cumberland Hill, RI: Industrial Electrical Equipment Bought and Removed
The electrical equipment in a decommissioned Cumberland Hill facility is almost always worth more than a scrap yard will tell you. Medium-voltage breakers, copper-wound transformers, obsolete bus plugs and current-production panelboard interiors all resell into a working replacement market. We pay against that market and subtract our removal cost openly instead of burying it in the number.
Rhode Island · statewide- Location
- Cumberland Hill, RI
- State
- Rhode Island
- Utilities
- Rhode Island Energy
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Cumberland Hill
Coverage in Cumberland Hill is run off our Rhode Island routing along I-95, I-195 and Route 146. Coordination with Rhode Island Energy on clearances, metering removal and final disconnect is part of the scope, not a change order. Older mill buildings under conversion in the Providence area carry vintage switchboards, panelboards and feeders that come out on tight urban schedules.
Once an offer is accepted in Cumberland Hill we schedule around your outage window, not ours. Nights, weekends and phased removals are normal. Crews arrive with their own rigging, skates, lifts, torches and oil-handling equipment, pull the gear, protect your floors and leave the electrical room clear for the next trade.
Plate 02
What we buy in Cumberland Hill
Fourteen categories. We buy every one of them at Cumberland Hill sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Copper is the floor under most of this equipment, and it is a floor that moves. Bus bar, windings and feeder cable set a minimum value we can always pay on a Cumberland Hill lot; resale demand for the specific make and model is what lifts the offer above it. Obsolete bus plugs and discontinued panelboard interiors are the clearest example — unglamorous parts that plants cannot buy new anywhere.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Cumberland Hill site |
| Freight | I-95, I-195 and Route 146 |
Plate 04
Safety and documentation
Safety is scope, not a brochure page. Crews working in Cumberland Hill operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
More Rhode Island cities on the same routing as Cumberland Hill:
Plate 06
Cumberland Hill questions
Do you actually buy electrical equipment in Cumberland Hill, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Cumberland Hill to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Cumberland Hill?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across Rhode Island continuously, small Cumberland Hill pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Cumberland Hill site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Cumberland Hill is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Cumberland Hill room is still partly live we phase the work.
How do you handle transformer oil in Cumberland Hill?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Cumberland Hill and nothing gets dumped — the handling cost is already in the offer.
When do we get paid?
Before the equipment leaves your Cumberland Hill dock. Wire, company check or cashier's check, whichever your accounting group prefers. On large phased projects we pay per load as it ships rather than holding everything until the end.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Cumberland Hill?
Photos of the nameplates are enough to start. Written offer the same business day.