Direct buyer · RI
Kingston, RI Industrial Electrical Equipment Purchase and Removal
We are a direct buyer, not a broker. In Kingston that distinction shows up on the dock: a broker's number is a guess that gets revised once their buyer sees the gear. Our offer is written against your nameplate photos and counts, itemized line by line, and it holds. We fund it ourselves and pay before the load moves.
Rhode Island · statewide- Location
- Kingston, RI
- State
- Rhode Island
- Utilities
- Rhode Island Energy
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Kingston
Coverage in Kingston is run off our Rhode Island routing along I-95, I-195 and Route 146. Coordination with Rhode Island Energy on clearances, metering removal and final disconnect is part of the scope, not a change order. Older mill buildings under conversion in the Providence area carry vintage switchboards, panelboards and feeders that come out on tight urban schedules.
The sequence on a Kingston job is short. You send nameplate photos or a list. We come back the same business day with a written itemized offer and a proposed removal window. If you accept, we survey access — door widths, floor loading, dock height, whether the room is still energized — then mobilize, lock out, disconnect, unbolt, rig, load and sweep. Payment lands before the trailer leaves.
Plate 02
What we buy in Kingston
Fourteen categories. We buy every one of them at Kingston sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Copper is the floor under most of this equipment, and it is a floor that moves. Bus bar, windings and feeder cable set a minimum value we can always pay on a Kingston lot; resale demand for the specific make and model is what lifts the offer above it. Obsolete bus plugs and discontinued panelboard interiors are the clearest example — unglamorous parts that plants cannot buy new anywhere.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Kingston site |
| Freight | I-95, I-195 and Route 146 |
Plate 04
Safety and documentation
If your Kingston facility runs permits — hot work, confined space, elevated work, site orientation, background checks — tell us at the quote stage and we build the time into the schedule rather than asking for an extension later. Our people are used to refinery, hospital and utility permitting cultures.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
Nearby Rhode Island coverage — crews serving Kingston also run to:
Plate 06
Kingston questions
What happens to the equipment after you buy it?
Serviceable gear is tested, reconditioned where needed and resold as replacement equipment — that resale is what funds your offer. What cannot go back into service is dismantled for copper, aluminum and steel recovery through permitted processors, with regulated fractions documented.
Do you buy equipment that is still energized and in service?
Yes, and most of what we buy is. We quote it now and remove it on your cutover date. Telling us at the quote stage which Kingston assets are still live lets us build the phasing and the clearance coordination into the schedule from the beginning.
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your Kingston site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Kingston lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Kingston purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in Kingston, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Kingston to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Kingston?
Photos of the nameplates are enough to start. Written offer the same business day.