Quote · Disconnect · Rig · Pay
St. Stephens, NC: Industrial Electrical Equipment Bought and Removed
When a line-up in St. Stephens comes out, the equipment stops being an asset on a depreciation schedule and becomes a rigging problem with a disposal cost attached. We buy that problem outright. Switchgear, transformers, generators, bus duct and plugs, panelboards, breakers, motor control centers and copper cable — and the teardown, rigging and freight are ours, not a subcontractor you have never met.
North Carolina · statewide- Location
- St. Stephens, NC
- State
- North Carolina
- Utilities
- Duke Energy Carolinas, Duke Ener
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in St. Stephens
St. Stephens sits in North Carolina, where Duke Energy Carolinas, Duke Energy Progress, Dominion feed the load and I-85, I-40, I-77 and I-95 carry the freight. Both facts land in your number: a site near those corridors costs us less to service and the saving shows up in the offer rather than our margin. Charlotte, Raleigh, Durham and Greensboro are regular stops, and St. Stephens work routes with them.
Once an offer is accepted in St. Stephens we schedule around your outage window, not ours. Nights, weekends and phased removals are normal. Crews arrive with their own rigging, skates, lifts, torches and oil-handling equipment, pull the gear, protect your floors and leave the electrical room clear for the next trade.
Plate 02
What we buy in St. Stephens
Fourteen categories. We buy every one of them at St. Stephens sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
We do not quote high and renegotiate on the dock, which is the complaint we hear most often about this trade. If what our crew finds in St. Stephens matches what you described, the written price is the price we pay. If it does not — breakers already pulled, windings cut, a different model than the photo — we show you exactly which line changed and why.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the St. Stephens site |
| Freight | I-85, I-40, I-77 and I-95 |
Plate 04
Safety and documentation
If your St. Stephens facility runs permits — hot work, confined space, elevated work, site orientation, background checks — tell us at the quote stage and we build the time into the schedule rather than asking for an extension later. Our people are used to refinery, hospital and utility permitting cultures.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
Nearby North Carolina coverage — crews serving St. Stephens also run to:
Plate 06
St. Stephens questions
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the St. Stephens lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on St. Stephens purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in St. Stephens, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to St. Stephens to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in St. Stephens?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across North Carolina continuously, small St. Stephens pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a St. Stephens site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to St. Stephens is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the St. Stephens room is still partly live we phase the work.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in St. Stephens?
Photos of the nameplates are enough to start. Written offer the same business day.