Quote · Disconnect · Rig · Pay
San Benito, TX Industrial Electrical Equipment Purchase and Removal
When a line-up in San Benito comes out, the equipment stops being an asset on a depreciation schedule and becomes a rigging problem with a disposal cost attached. We buy that problem outright. Switchgear, transformers, generators, bus duct and plugs, panelboards, breakers, motor control centers and copper cable — and the teardown, rigging and freight are ours, not a subcontractor you have never met.
Texas · statewide- Location
- San Benito, TX
- State
- Texas
- Utilities
- Oncor, CenterPoint Energy, AEP T
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in San Benito
Our Texas routing runs along I-35, I-45, I-10, I-20 and I-30, which keeps trailer and crew cost predictable on San Benito projects. Utility territory matters too — Oncor, CenterPoint Energy, AEP Texas, Austin Energy, CPS Energy each have their own clearance, metering and disconnect expectations, and we have worked inside them. Texas is our largest market: Gulf Coast petrochemical turnarounds, ERCOT generation retirements, oilfield electrification and Dallas and Austin construction all move medium-voltage switchgear, transformers and generators constantly.
Paperwork travels with the job: a certificate of insurance naming your entity, a W-9, a signed purchase agreement listing every asset and its price, oil test and disposal manifests where transformers are in scope, and weight tickets or a bill of lading for what leaves the San Benito site. Maintenance, EHS and accounting each get the document they need.
Plate 02
What we buy in San Benito
Fourteen categories. We buy every one of them at San Benito sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Sometimes the equipment value exceeds our removal cost and you receive a check. On older, stripped or badly access-restricted San Benito scopes, the removal cost exceeds the value and the project nets near zero or a modest fee. You hear which one you are looking at up front rather than halfway through the teardown.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the San Benito site |
| Freight | I-35, I-45, I-10, I-20 and I-30 |
Plate 04
Safety and documentation
Safety is scope, not a brochure page. Crews working in San Benito operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
We cover the whole Texas market, so if your equipment is not in San Benito itself, one of these is probably closer:
Plate 06
San Benito questions
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your San Benito site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the San Benito lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on San Benito purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in San Benito, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to San Benito to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in San Benito?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across Texas continuously, small San Benito pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a San Benito site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to San Benito is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in San Benito?
Photos of the nameplates are enough to start. Written offer the same business day.