Quote · Disconnect · Rig · Pay
Orchard Homes, MT: Industrial Electrical Equipment Bought and Removed
We work with Orchard Homes plant managers, facility directors, electrical contractors, demolition contractors and utility engineers on the same footing: tell us what is there, we send back a number and a removal plan. Sites with escort requirements, hot work permitting or classified areas are routine rather than exceptional.
Montana · statewide- Location
- Orchard Homes, MT
- State
- Montana
- Utilities
- NorthWestern Energy, Montana-Dak
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Orchard Homes
Coverage in Orchard Homes is run off our Montana routing along I-90, I-15 and US-2. Coordination with NorthWestern Energy, Montana-Dakota Utilities, Flathead Electric on clearances, metering removal and final disconnect is part of the scope, not a change order. Long hauls between sites make freight a real line item on Montana quotes, so we combine mining, refinery and utility pickups across the state where scheduling allows.
The sequence on a Orchard Homes job is short. You send nameplate photos or a list. We come back the same business day with a written itemized offer and a proposed removal window. If you accept, we survey access — door widths, floor loading, dock height, whether the room is still energized — then mobilize, lock out, disconnect, unbolt, rig, load and sweep. Payment lands before the trailer leaves.
Plate 02
What we buy in Orchard Homes
Fourteen categories. We buy every one of them at Orchard Homes sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Sometimes the equipment value exceeds our removal cost and you receive a check. On older, stripped or badly access-restricted Orchard Homes scopes, the removal cost exceeds the value and the project nets near zero or a modest fee. You hear which one you are looking at up front rather than halfway through the teardown.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Orchard Homes site |
| Freight | I-90, I-15 and US-2 |
Plate 04
Safety and documentation
Safety is scope, not a brochure page. Crews working in Orchard Homes operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
We cover the whole Montana market, so if your equipment is not in Orchard Homes itself, one of these is probably closer:
Plate 06
Orchard Homes questions
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your Orchard Homes site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Orchard Homes lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Orchard Homes purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in Orchard Homes, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Orchard Homes to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Orchard Homes?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across Montana continuously, small Orchard Homes pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Orchard Homes site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Orchard Homes is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Orchard Homes?
Photos of the nameplates are enough to start. Written offer the same business day.