Direct buyer · TX
Midlothian, TX Industrial Electrical Equipment Purchase and Removal
The electrical equipment in a decommissioned Midlothian facility is almost always worth more than a scrap yard will tell you. Medium-voltage breakers, copper-wound transformers, obsolete bus plugs and current-production panelboard interiors all resell into a working replacement market. We pay against that market and subtract our removal cost openly instead of burying it in the number.
Texas · statewide- Location
- Midlothian, TX
- State
- Texas
- Utilities
- Oncor, CenterPoint Energy, AEP T
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Midlothian
Our Texas routing runs along I-35, I-45, I-10, I-20 and I-30, which keeps trailer and crew cost predictable on Midlothian projects. Utility territory matters too — Oncor, CenterPoint Energy, AEP Texas, Austin Energy, CPS Energy each have their own clearance, metering and disconnect expectations, and we have worked inside them. Texas is our largest market: Gulf Coast petrochemical turnarounds, ERCOT generation retirements, oilfield electrification and Dallas and Austin construction all move medium-voltage switchgear, transformers and generators constantly.
If the Midlothian equipment is still carrying load, we phase it. Usually that means dead sections and spares first, then distribution as circuits are released, then the main line-up once the last feeder is isolated. The phasing goes into the offer so nobody is improvising in an energized room at two in the morning.
Plate 02
What we buy in Midlothian
Fourteen categories. We buy every one of them at Midlothian sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Transformer oil is the item sellers in Midlothian worry about most, and fairly so. We test it, drain it, manifest it through licensed handlers and hand you the documentation. PCB-suspect units are handled under their own waste profile. The cost of that handling is already inside the offer, so nothing surprises you after the fact.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Midlothian site |
| Freight | I-35, I-45, I-10, I-20 and I-30 |
Plate 04
Safety and documentation
Safety is scope, not a brochure page. Crews working in Midlothian operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
We cover the whole Texas market, so if your equipment is not in Midlothian itself, one of these is probably closer:
Plate 06
Midlothian questions
Do you actually buy electrical equipment in Midlothian, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Midlothian to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Midlothian?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across Texas continuously, small Midlothian pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Midlothian site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Midlothian is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Midlothian room is still partly live we phase the work.
How do you handle transformer oil in Midlothian?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Midlothian and nothing gets dumped — the handling cost is already in the offer.
When do we get paid?
Before the equipment leaves your Midlothian dock. Wire, company check or cashier's check, whichever your accounting group prefers. On large phased projects we pay per load as it ships rather than holding everything until the end.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Midlothian?
Photos of the nameplates are enough to start. Written offer the same business day.