Quote · Disconnect · Rig · Pay
Hunters Creek, FL Industrial Electrical Equipment Purchase and Removal
Buying electrical equipment out of a live Hunters Creek building is a different job from buying it out of a warehouse. Electrical rooms have door widths, freight elevators have weight limits, hospitals and process plants have loads that cannot blink, and someone has to own the sequence. We survey first, write the sequence into the offer, then execute it.
Florida · statewide- Location
- Hunters Creek, FL
- State
- Florida
- Utilities
- FPL, Duke Energy Florida, TECO,
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Hunters Creek
Florida industry gives Hunters Creek projects a real secondary market close by. Hurricane-season generator turnover keeps standby sets and transfer switches moving through Florida year-round, and phosphate, citrus and power-plant retirements add transformers and MV switchgear. Our purchasing desk is based in South Florida. Equipment that leaves your site frequently goes back into service within a few hundred miles of where we picked it up, and that is what lets us pay above metal value.
Once an offer is accepted in Hunters Creek we schedule around your outage window, not ours. Nights, weekends and phased removals are normal. Crews arrive with their own rigging, skates, lifts, torches and oil-handling equipment, pull the gear, protect your floors and leave the electrical room clear for the next trade.
Plate 02
What we buy in Hunters Creek
Fourteen categories. We buy every one of them at Hunters Creek sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
We do not quote high and renegotiate on the dock, which is the complaint we hear most often about this trade. If what our crew finds in Hunters Creek matches what you described, the written price is the price we pay. If it does not — breakers already pulled, windings cut, a different model than the photo — we show you exactly which line changed and why.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Hunters Creek site |
| Freight | I-95, I-75, I-4 and the Turnpike |
Plate 04
Safety and documentation
Safety is scope, not a brochure page. Crews working in Hunters Creek operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
Nearby Florida coverage — crews serving Hunters Creek also run to:
- Hutchinson Island South
- Immokalee
- Indian Harbour Beach
- Indian River Estates
- Indian River Shores
- Indiantown
- Inverness
- Inverness Highlands South
Plate 06
Hunters Creek questions
How do you handle transformer oil in Hunters Creek?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Hunters Creek and nothing gets dumped — the handling cost is already in the offer.
When do we get paid?
Before the equipment leaves your Hunters Creek dock. Wire, company check or cashier's check, whichever your accounting group prefers. On large phased projects we pay per load as it ships rather than holding everything until the end.
What if the equipment is old or has no test records?
We still quote it. Records raise the number — a NETA test report on a breaker or a transformer is the single document that most improves what we can pay — but their absence disqualifies nothing. We price Hunters Creek equipment on what our technicians and the replacement market say it is worth.
Are you insured to work inside our Hunters Creek facility?
Yes. We carry general liability, auto, workers' compensation and umbrella coverage, and we issue a certificate naming your entity as additional insured before crews mobilize to Hunters Creek. We also complete vendor onboarding, background checks and site-specific safety orientation on request.
Can you work nights, weekends or during a shutdown in Hunters Creek?
Regularly. Most electrical removals happen outside production hours because that is when circuits can be released. Night, weekend, holiday and turnaround windows in Hunters Creek are normal scheduling for us, not a premium service.
What happens to the equipment after you buy it?
Serviceable gear is tested, reconditioned where needed and resold as replacement equipment — that resale is what funds your offer. What cannot go back into service is dismantled for copper, aluminum and steel recovery through permitted processors, with regulated fractions documented.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Hunters Creek?
Photos of the nameplates are enough to start. Written offer the same business day.