Direct buyer · MN
Ham Lake, MN: Industrial Electrical Equipment Bought and Removed
When a line-up in Ham Lake comes out, the equipment stops being an asset on a depreciation schedule and becomes a rigging problem with a disposal cost attached. We buy that problem outright. Switchgear, transformers, generators, bus duct and plugs, panelboards, breakers, motor control centers and copper cable — and the teardown, rigging and freight are ours, not a subcontractor you have never met.
Minnesota · statewide- Location
- Ham Lake, MN
- State
- Minnesota
- Utilities
- Xcel Energy, Minnesota Power, Gr
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Ham Lake
Ham Lake sits in Minnesota, where Xcel Energy, Minnesota Power, Great River Energy feed the load and I-35, I-94, I-494 and I-694 carry the freight. Both facts land in your number: a site near those corridors costs us less to service and the saving shows up in the offer rather than our margin. Minneapolis, St. Paul, Chaska and Rochester are regular stops, and Ham Lake work routes with them.
For Ham Lake sites we quote two ways when it helps: a single number for the scope as it stands, and a line-by-line itemization showing what the switchgear, the transformers, the busway and the cable each contribute. Some teams need the lump sum to move an approval; others need the detail for their asset records. You can have both.
Plate 02
What we buy in Ham Lake
Fourteen categories. We buy every one of them at Ham Lake sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Transformer oil is the item sellers in Ham Lake worry about most, and fairly so. We test it, drain it, manifest it through licensed handlers and hand you the documentation. PCB-suspect units are handled under their own waste profile. The cost of that handling is already inside the offer, so nothing surprises you after the fact.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Ham Lake site |
| Freight | I-35, I-94, I-494 and I-694 |
Plate 04
Safety and documentation
Safety is scope, not a brochure page. Crews working in Ham Lake operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
Other Minnesota locations we buy electrical equipment in:
Plate 06
Ham Lake questions
Are you insured to work inside our Ham Lake facility?
Yes. We carry general liability, auto, workers' compensation and umbrella coverage, and we issue a certificate naming your entity as additional insured before crews mobilize to Ham Lake. We also complete vendor onboarding, background checks and site-specific safety orientation on request.
Can you work nights, weekends or during a shutdown in Ham Lake?
Regularly. Most electrical removals happen outside production hours because that is when circuits can be released. Night, weekend, holiday and turnaround windows in Ham Lake are normal scheduling for us, not a premium service.
What happens to the equipment after you buy it?
Serviceable gear is tested, reconditioned where needed and resold as replacement equipment — that resale is what funds your offer. What cannot go back into service is dismantled for copper, aluminum and steel recovery through permitted processors, with regulated fractions documented.
Do you buy equipment that is still energized and in service?
Yes, and most of what we buy is. We quote it now and remove it on your cutover date. Telling us at the quote stage which Ham Lake assets are still live lets us build the phasing and the clearance coordination into the schedule from the beginning.
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your Ham Lake site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Ham Lake lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Ham Lake?
Photos of the nameplates are enough to start. Written offer the same business day.