Michigan coverage · Written offers
Selling Industrial Electrical Equipment in Ferndale, MI
When a line-up in Ferndale comes out, the equipment stops being an asset on a depreciation schedule and becomes a rigging problem with a disposal cost attached. We buy that problem outright. Switchgear, transformers, generators, bus duct and plugs, panelboards, breakers, motor control centers and copper cable — and the teardown, rigging and freight are ours, not a subcontractor you have never met.
Michigan · statewide- Location
- Ferndale, MI
- State
- Michigan
- Utilities
- DTE Energy, Consumers Energy, La
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Ferndale
Coverage in Ferndale is run off our Michigan routing along I-75, I-94, I-96 and I-696. Coordination with DTE Energy, Consumers Energy, Lansing BWL on clearances, metering removal and final disconnect is part of the scope, not a change order. Automotive plant consolidations around Detroit put more MCC buckets, busway and unit substations on the market than anywhere else in the Midwest, and we buy whole plant electrical scopes there routinely.
Once an offer is accepted in Ferndale we schedule around your outage window, not ours. Nights, weekends and phased removals are normal. Crews arrive with their own rigging, skates, lifts, torches and oil-handling equipment, pull the gear, protect your floors and leave the electrical room clear for the next trade.
Plate 02
What we buy in Ferndale
Fourteen categories. We buy every one of them at Ferndale sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Three things drive the number: condition, whether the equipment is still supported, and copper content. A medium-voltage line-up with current vacuum breakers and a recent test report prices as reusable equipment. An identical structure with obsolete air-magnetic breakers and no nameplate prices on its bus and steel. We tell you which bucket your Ferndale gear falls into before you commit to anything.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Ferndale site |
| Freight | I-75, I-94, I-96 and I-696 |
Plate 04
Safety and documentation
Nothing leaves a Ferndale site undocumented. Nameplate data is recorded as equipment comes out, regulated items like transformer oil and older capacitors are separated under their own profile, and you receive a reconciled report your EHS group can file against the original purchase agreement.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
Other Michigan locations we buy electrical equipment in:
Plate 06
Ferndale questions
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your Ferndale site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Ferndale lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Ferndale purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in Ferndale, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Ferndale to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Ferndale?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across Michigan continuously, small Ferndale pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Ferndale site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Ferndale is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Ferndale?
Photos of the nameplates are enough to start. Written offer the same business day.