Kenner, LA · Motor Control Center Buyers
Kenner, LA Motor Control Center Buyers
Kenner facility and construction teams call us when equipment is coming out and nobody wants to coordinate an electrician, a rigger and a hauler around one outage window. We are all three, and we pay you for the equipment on top of it instead of charging you to haul it away.
Serving Kenner and metro- Location
- Kenner, LA
- Desk
- Motor Control Center Buyers
- Ratings
- NEMA and IEC, 480 V – 7.2 kV
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Motor Control Centers buyers serving Kenner
Gulf Coast petrochemical turnarounds are the dominant source of medium-voltage switchgear, MV MCCs and large rectifier transformers in the state, and hot-work permitting is standard on our crews' scope. For Kenner specifically that density helps: crews already move through New Orleans, Baton Rouge, Shreveport and Lafayette, so mobilization is a scheduling question rather than a cost problem.
The sequence is short. You send nameplate photos, a one-line diagram or just a list. We return a written itemized offer the same business day with a proposed removal window. On acceptance we survey access in Kenner — door widths, floor loading, dock, elevator, crane needs — then mobilize, lock out, disconnect, rig, load and sweep. Payment before the truck leaves.
| Item | Detail |
|---|---|
| Ratings | NEMA and IEC, 480 V – 7.2 kV |
| Scope | Line-ups, sections, buckets and starters |
| Nameplates | Allen-Bradley CENTERLINE, Square D Model 6, General Electric 8000 and Evolution, Eaton Freedom and Advantage, Siemens Tiastar, Westinghouse Five Star, Furnas, Toshiba |
| Condition | Working, retired, water-damaged or already dismantled |
| Minimum | One section, one unit, or a whole plant lot |
Plate 02
What we take out of Kenner sites
Complete MCC line-ups
Multi-section NEMA line-ups fully loaded with starters, back-to-back and front-only arrangements, with main breaker or main lug incoming sections. Allen-Bradley CENTERLINE, Square D Model 6, GE 8000 and Eaton Freedom line-ups all have deep aftermarket demand.
Buckets, starters and drives
Individual starter buckets from size 0 through size 6, reversing and two-speed units, VFD buckets, soft starters, feeder and lighting buckets, and the loose units sitting in your spares room. Buckets sell faster than line-ups and are the easiest MCC item to move.
Louisiana specifics
Gulf Coast petrochemical turnarounds are the dominant source of medium-voltage switchgear, MV MCCs and large rectifier transformers in the state, and hot-work permitting is standard on our crews' scope.
Plate 03
Nearby and related
We cover Louisiana statewide, so if the equipment is not in Kenner itself, one of these is probably closer:
Plate 04
Kenner questions
Do you actually buy electrical equipment in Kenner, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Kenner to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Kenner?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across Louisiana continuously, small Kenner pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Kenner site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Kenner is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Kenner room is still partly live we phase the work.
How do you handle transformer oil in Kenner?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Kenner and nothing gets dumped — the handling cost is already in the offer.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Motor Control Centers in Kenner?
One call, one written offer, one crew. Payment before the trailer leaves.