Everett, WA · Motor Control Center Buyers
Sell Motor Control Centers in Everett, WA
We purchase motor control centers throughout Everett and the surrounding Washington market. That includes equipment still energized and scheduled for replacement, equipment already isolated after a shutdown, and whole electrical rooms coming out of a building change. We buy it and we remove it — one offer, one crew, one certificate of insurance.
Serving Everett and metro- Location
- Everett, WA
- Desk
- Motor Control Center Buyers
- Ratings
- NEMA and IEC, 480 V – 7.2 kV
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Motor Control Centers buyers serving Everett
Everett sits in Washington, where Puget Sound Energy, Seattle City Light, Avista, Grant County PUD feed the load and I-5, I-90, I-405 and SR-167 carry the freight. Sites near those corridors cost us less to service, and that shows up in your offer rather than in our margin. Seattle, Quincy, Redmond, Tacoma and Spokane are routine stops and Everett work routes with them.
If the Everett equipment is still carrying load we phase it — dead sections and spares first, distribution as circuits are released, the main line-up on the final clearance. The phasing is written into the offer so nobody improvises in an energized room at two in the morning.
| Item | Detail |
|---|---|
| Ratings | NEMA and IEC, 480 V – 7.2 kV |
| Scope | Line-ups, sections, buckets and starters |
| Nameplates | Allen-Bradley CENTERLINE, Square D Model 6, General Electric 8000 and Evolution, Eaton Freedom and Advantage, Siemens Tiastar, Westinghouse Five Star, Furnas, Toshiba |
| Condition | Working, retired, water-damaged or already dismantled |
| Minimum | One section, one unit, or a whole plant lot |
Plate 02
What we take out of Everett sites
Complete MCC line-ups
Multi-section NEMA line-ups fully loaded with starters, back-to-back and front-only arrangements, with main breaker or main lug incoming sections. Allen-Bradley CENTERLINE, Square D Model 6, GE 8000 and Eaton Freedom line-ups all have deep aftermarket demand.
Buckets, starters and drives
Individual starter buckets from size 0 through size 6, reversing and two-speed units, VFD buckets, soft starters, feeder and lighting buckets, and the loose units sitting in your spares room. Buckets sell faster than line-ups and are the easiest MCC item to move.
Washington specifics
Aerospace, aluminum and food processing operations plus Bonneville-territory utility upgrades put large switchgear, rectifier transformers and MV cable on the market, and Puget Sound port access helps on export loads.
Plate 03
Nearby and related
Nearby Washington coverage — crews serving Everett also run to:
Plate 04
Everett questions
How fast can you get to a Everett site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Everett is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Everett room is still partly live we phase the work.
How do you handle transformer oil in Everett?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Everett and nothing gets dumped — the handling cost is already in the offer.
When do we get paid?
Before the equipment leaves your Everett dock. Wire, company check or cashier's check, whichever your accounting group prefers. On large phased projects we pay per load as it ships rather than holding everything until the end.
What if the equipment is old or has no test records?
We still quote it. Records raise the number — a NETA test report on a breaker or a transformer is the single document that most improves what we can pay — but their absence disqualifies nothing. We price Everett equipment on what our technicians and the replacement market say it is worth.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Motor Control Centers in Everett?
One call, one written offer, one crew. Payment before the trailer leaves.