Own crews · Own trailers · NM
Industrial Electrical Equipment Buyer for Hobbs, NM Facilities
Most Hobbs plant engineers call us at one of two moments: the week a capital upgrade is approved, or the week a demolition contractor asks who is taking the electrical scope. The question is the same either way — what is it worth, and who gets it out of the building? One written offer answers both, because we are the buyer, the removal contractor and the hauler.
New Mexico · statewide- Location
- Hobbs, NM
- State
- New Mexico
- Utilities
- PNM, El Paso Electric, Xcel Ener
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
Plate 01
Buying electrical equipment in Hobbs
Our New Mexico routing runs along I-25, I-40 and I-10, which keeps trailer and crew cost predictable on Hobbs projects. Utility territory matters too — PNM, El Paso Electric, Xcel Energy each have their own clearance, metering and disconnect expectations, and we have worked inside them. National laboratory and utility work at Albuquerque and Los Alamos produces documented switchgear and transformer disposition, and oil-patch activity in the southeast adds classified-area gear.
For Hobbs sites we quote two ways when it helps: a single number for the scope as it stands, and a line-by-line itemization showing what the switchgear, the transformers, the busway and the cable each contribute. Some teams need the lump sum to move an approval; others need the detail for their asset records. You can have both.
Plate 02
What we buy in Hobbs
Fourteen categories. We buy every one of them at Hobbs sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVABus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMLoad Banks
Resistive and reactive, portable and permanent
100 kW – 3 MW resistiveCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopePlate 03
What drives the number
Transformer oil is the item sellers in Hobbs worry about most, and fairly so. We test it, drain it, manifest it through licensed handlers and hand you the documentation. PCB-suspect units are handled under their own waste profile. The cost of that handling is already inside the offer, so nothing surprises you after the fact.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Hobbs site |
| Freight | I-25, I-40 and I-10 |
Plate 04
Safety and documentation
Safety is scope, not a brochure page. Crews working in Hobbs operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Plate 05
Nearby cities and buyer desks
More New Mexico cities on the same routing as Hobbs:
Plate 06
Hobbs questions
Do you actually buy electrical equipment in Hobbs, or just broker it?
We buy it. Industrial Electrical Buyer is the purchaser of record — we fund the purchase, send our own crews to Hobbs to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Hobbs?
A single transformer, one switchgear section, a pallet of bus plugs or a few boxes of breakers is worth a call. Because we route crews across New Mexico continuously, small Hobbs pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Hobbs site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Hobbs is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Hobbs room is still partly live we phase the work.
How do you handle transformer oil in Hobbs?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Hobbs and nothing gets dumped — the handling cost is already in the offer.
When do we get paid?
Before the equipment leaves your Hobbs dock. Wire, company check or cashier's check, whichever your accounting group prefers. On large phased projects we pay per load as it ships rather than holding everything until the end.
Form 1 — Request for Offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
Electrical equipment in Hobbs?
Photos of the nameplates are enough to start. Written offer the same business day.